- Description
Specifications
instruction:
material
Any design, Any image,Any character or font.
AI / DXF / DWG / EPS / PDF / SKP files are preferable but we can help converting JPG or any image files format.
Send me a message to discuss your design in detail!
Elecric Handheld Tool Models for Branding:
Watage / Max Arena sq-in / Max Arena cm2
100W / 3,6 sq-in. / 16 cm2
200W / 5,5 sq-in. / 36 cm2
300W / 14,4 sq-in. / 100 cm2
500W / 25 sq-in. / 169 cm2
Instructions for Use:
When burning, adjust the temperature of the brass plate to the material into which you will burn / print. First, try the optimal set up on scrap material.
Please read the following instructions carefully.
--- The brass burning head cannot exceed a temperature of 500°C (932°F).
--- Once heated to the optimal temperature, disconnect the device from the electrical networks or turn the gas burner off.
--- Do not leave the heating turned on permanently!
--- We recommend using the Laser IR Infrared Digital Temperature Thermometer and check its temperature regularly.
--- Use protective gloves. There is a risk of getting burned.
--- Never leave the device unattended.
--- Use a non-flammable work mat.
.
If used incorrectly and if the instructions are not followed, we bear no responsibility for any possible damages caused to property or health injuries.