Your position: Home > Embossing stamp > elec iron stamp

Custom Branding Brass Stamp with 60W Iron Leather Stamp, Heat Embosser,Embossing Stamp

Handmade Supply Material: Pure copper core Craft type: Baking, Engraving, Leatherworking, Woodworking & carpentry Materials: metal, brass Made to order
Item Code: eletric iron-002
Market Price:
USD $0.00
Price:
Save $-125.00(1% Off)
PDF Format
    Please select the information you wantX
+
-
Units
  • Description
Specifications
instruction: material
Soldering Iron:
> Interface: 5mm screw rod
>Power: 220v 60W. Temperature Adjustable (200-400℃)or(Fahrenheit:390℉-750℉).

……………………………………...
Custom Brass Stamp:
>Material: Brass stamp
>Stamp thickness: 6mm - 8mm
>Depth to engrave: 2.5mm - 3.5mm
>Size: design up to 10 cm square in area. e.g. 5cm x 2cm or 3cmx 3cm. 
The power is not very sufficient, so we suggest the area should not be very large; in order to have a ideal effect, if you choose a square or a round one, these diameter should not be more than 3 cm; if you choose a oblong or a elliptic one, these longest edge should not be more than 5 cm.
>Artwork: Please send me you logo design when you placed order. It could be format of ai. psd. pdf. jpg. png. esp., in hight solution please.
If you use name or words, please list it in EXACT ORDER you want it on the stamp. 
You list ACB, you got ACB.
Lots of fonts available, please give me some inspiration.

……………………………………………………………………………………………………
Usage: The product is equipped with modified screw with original copper core; its heat conduction is very fast and it also prolongs products’ service life.

Add your logo to your leather products with a custom made stamp with heat embosser!
It's very easy to use and takes only seconds to have a deep and long lasting emboss on various kind of leather.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

How to use?
>For heat embossing 
1) Remove the metal tip of the soldering iron 
2) Install the stamp by screwing it into the soldering iron 
3) Heat up the soldering iron to the operating temperature for about 10-15 minutes 
4) Emboss on a dry leather surface and release 
5) Let stamp cool down for 15 mins before removing it from the soldering iron.

>For foil stamping
1) Remove the metal tip of the soldering iron
2) Install the stamp with the screw to the soldering iron
3) Heat up the soldering iron to operating temperature (250℃), for about 10-15 minutes
4) Cut out foil with suitable size and place it on a dry leather surface, shiny surface face out
5) Stamp on the foil for around 10 seconds
6) Leave it cool down for 15mins before removing the stamp out
Customer Reviews
Average rating:

Share your thoughts with other customers

TOP